Similar Projects
Last Updated | 06/17/2022 03:14 AM |
Project Title | 2022 Sewer and Water System Improvements |
Physical Address | View project details and contacts |
City, State (County) | Omak, WA (Okanogan County) |
Category(s) | Sewer and Water |
Sub-Category(s) | Sanitary Sewers, Water Lines |
Contracting Method | Competitive Bids. |
Project Status | Results |
Bids Due | View project details and contacts |
Estimated Value | $2,800,000 to $3,100,000 |
Plans Available from | |
Owner | View project details and contacts |
Architect | View project details and contacts |
Description | The work consists of furnishing all material, labor, tools, equipment, and incidentals necessary for construction of the 2022 Sewer and Water System Improvements project. Work will be performed within City owned rights-of-way, permanent easements, and on private property where temporary construction easements and/or rights-of-entry have been obtained for construction. The work consists of, but is not limited to, the following: Schedule A - Sewer System Improvements 1. Furnish and install approximately 3,262 feet of 8-inch and 12-inch HDPE sanitary sewer pipe and 4,000 feet of 4-inch HDPE side sewer pipe by pipe bursting construction. 2. Furnish and install approximately 529 feet of 8-inch PVC sanitary sewer pipe and 400 feet of 4-inch PVC side sewer pipe. 3. Furnish and install 14 manholes and approximately 38 side sewer cleanouts. 4. Provide television inspection of sewer mains and side sewers. 5. Reconnection of approximately 65 side sewers. 6. Surface restoration of all disturbed surfaces. Schedule B - Hemlock Street Water System Improvements 1. Furnish and install approximately 310 feet of 8-inch DI water main, 50 feet of 1-inch HDPE water service pipe, three gate valves, fittings and appurtenances. 2. Surface restoration of all disturbed surfaces. Schedule C - Dewberry Avenue Water System Improvements 1. Furnish and install approximately 740 feet of 8-inch DI water main, 550 feet of 1-inch HDPE water service pipe, three gate valves, one pressure reducing valve vault, one fire hydrant assembly, fittings and appurtenances. 2. Surface restoration of all disturbed surfaces |
||||
Details |
|
||||
Bidder's List | View project details and contacts | ||||
Prospective Bidders | View project details and contacts | ||||
Project Documents |
Engineered Spec Sheet Architectural Plans Other Documents |