Water Well and Yard Hydrant Installation

1. A 5” Schedule 80 PVC well casing. 2. Well and pump capacity of 16 gallons per minute at 45 – 60 PSI. 3. Installation of water supply line and electrical wiring from well to pressure tank and pressure tank to electrical panel located inside the maintenance building. 4. Installation of a 20-gallon pressure tank inside heated maintenance building as shown in plans provided in this request for price. 5. Complete Installation of 2 – Woodford Model S4H sanitary yard hydrants as shown in plans provided in this request for price using at 1 inch or larger supply line. 6. Compacted sand backfill of any trenches crossing driveways or walking trails. 7. Installation of all exterior water lines and hydrants shall be below specified frost level for this region. 8. The contractor shall assume the responsibility of estimating the depth of the well. 9. The contractor must ensure that final inspections and water testing are satisfactory. 10. The contractor must submit to owner, all operating and maintenance instructions including shop drawings for all equipment installed.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Cast-in-Place Concrete.
Division 22 -	Plumbing, Plumbing Piping, Plumbing Equipment.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems.
Division 33 -	Utilities, Water Utilities, Water Utility Distribution Piping, Water Utility Distribution Equipment, Water Utility Pumping Stations, Wells.
Division 44 -	Pollution and Waste Control Equipment, Water Pollution Control Equipment.