Similar Projects
Last Updated | 06/14/2023 12:05 PM |
Project Title | Spot Repairs to N. Boggy Creek Storm Sewer Pipe on Elm Ave. From N. 3rd St. To N. Van Buren St |
Physical Address | View project details and contacts |
City, State (County) | Enid, OK 73701 (Garfield County) |
Category(s) | Single Trades |
Sub-Category(s) | Plumbing |
Contracting Method | Competitive Bids |
Project Status | Results, Construction start expected June 2023 |
Bids Due | View project details and contacts |
Estimated Value | $323,750 [brand] Estimate |
Plans Available from | Civil Engineer |
Owner | View project details and contacts |
Architect | View project details and contacts |
Description | Reference Number:0000317220 Taylor Massey 580-616-7247 tmassey@enid.org - Insurance Required - Statutory :100 % The project is to repair compromised areas of the North Boggy Creek storm sewer pipe. The repairs will be in areas of the pipe that is on Elm Avenue from North 3rd Street to North Van Buren Street. Contact Information Angela Rasmuson 580-616-7242 arasmuson@enid.org Taylor Massey 580-616-7247 tmassey@enid.org Question Deadline May 01, 2023 at 5:00 PM The Owner intends to award a contract to repair North Boggy Creek storm sewer line from N. Third St. N. Van Buren St. on West Elem Ave. in the City of Enid. - F-2303C project. The work shall encompass the reparing of RCC Box in line one and repairing of egg-shaped Brick masonry storm sewer from line 2 to line 8. It has limited access locations. It is contractor's responsibility to make arrangements and safety of workers since it is under ground closed storm sewer line. The items included in this construction are as follows: 1. Reinforced Concrete Box Storm sewer. 5 -6-ft height x 7.5' ft span reinforced concrete box shaped a. existing storm sewer line at line one need repairs to improve stability functioning of storm sewer line. Repairs are clarified in to 3 conditions. Some areas rebars are exposed and rusted: Clean damaged concrete and rusted rebar. As per specification and drawing attached. Follow the construction method shown in 521.04-D-(2) (ODOT Specification SECTION 521- PNEUMATICALLY APPLIED MORTAR). Repairs are graded as 4 in attached repair locations b. Concrete Scaling Repair: Chip loose concrete until solid, clean with wire wheel, blow clean and Prepare and apply the Mortal as per the Follow the construction method given 521.04-D-(2). Repairs are graded as 3 in attached repair locations 2. a. Brick masonry joints repair: clean brick Masonry damaged area. Clean minimum 1" deep in to brick joints. Apply mortar as per the section 521.04. Repairs are graded as 3 in attached repair locations b. Brick masonry damaged area repair. Repair damaged places, Pipe intrusion, Missing brick areas, Cracks in bricks, cracked mortar, as per the specifications attaching using Pneumatically applied mortar. (ODOTSECTION 521-PNEUMATICALLY APPLIED MORTAR. Repairs are graded as 4 in attached repair locations |
||
Details |
|
||
Bidder's List | View project details and contacts | ||
Prospective Bidders | View project details and contacts | ||
Project Documents |
Engineered Spec Sheet Architectural Plans Other Documents |