Repairs and Striping at the Detention Facilities

Provide all labor, materials, and equipment necessary to wedge mill parking lot perimeter, apply a 1 1/2 " HMAC overlay and paint strip parking lot spaces. Cold Milling Equipment: Contractor shall provide a self-propelled machine capable of wedge milling asphalt parking lot perimeter 1 1/2 " deep measured at the toe of the existing concrete curb to a depth of 0" a distance of 15' from the toe of the concrete curb. Paving Operations: Contractor shall place 1 1/2 " deep Hot-Mix Asphaltic Concrete Overlay (BM-2A w/PG70-28) over the existing parking lot wearing surface. Hot-Mix Asphaltic Concrete shall be spread and finished using a Paver meeting the requirements specified in Subsection 155.5 of the KDOT Standard Road and Bridge Specifications, latest edition and addendum. The Paver shall be operated at a speed which shall provide a uniform rate of placement without undue interruption. At all times, keep the paver hopper sufficiently full to prevent non-uniform flow of the HMA to the augers and screed. Asphalt for Tack Coats: Prior to placing any HMA, Contractor shall spray on the pavement surface receiving HMA a uniform coat of Emulsion Asphalt SS-1HP meeting the requirements as specified in Section 1203 Kansas Department of Transportation, Standard Specifications, latest edition and addendum. Application rate shall be 0.03 to 0.06 gallons per square yard.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways, Paving Specialties, Pavement Markings.
Division 33 -	Utilities, Storm Drainage Utilities, Storm Drainage Structures.