Grand Traverse Substation Split

The Contractor shall furnish and install the steel structures and metal bussing, all as specified and shown on the Drawings. The Contractor shall furnish all bolts and miscellaneous hardware to mount equipment to structural steel and to connect equipment together. The substation structure shall be fabricated and assembled to meet standard practices and specifications as recommended by American Institute of Steel Construction (AISC) and in a manner so that basic electric design clearances shown and noted on the Drawings will be met, and no where shall such clearances be less than recommended by NEMA and ANSI Standards at such points not expressly shown or noted. You are invited to bid on a general construction contract. The Contract provides for the furnishing of all labor, equipment, and materials necessary to complete the Grand Traverse Substation Split Project. The Owner will furnish certain material as listed in the Project Manual to the Contractor. The Contractor will be required to pickup and transport all material which is supplied from the Owner's warehouse to the project site and also be responsible for receipt and unloading of large material at the Project site(s). A. The requirements of this section apply to all other sections of Division 2. B. The work shall be executed in conformity with best practice and shall accommodate itself to the project. The Contractor shall consult the Drawings, shop drawings, and field layouts of other trades and shall be governed accordingly in the laying out and installation of his work. C. The Drawings are diagrammatic and indicate the general arrangement of systems and work included in the contract.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Concrete Forming and Accessories, Concrete Reinforcing, Cast-in-Place Concrete, Structural Concrete, High-Performance Structural Concrete, Concrete Finishing, Specialty Placed Concrete, Precast Structural Concrete, Precast Concrete Specialties.
Division 04 -	Masonry, Unit Masonry, Concrete Form Masonry Units.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Weather Barriers.
Division 08 -	Openings, Doors and Frames, Specialty Doors and Frames, Access Doors and Panels, Coiling Doors and Grilles, Windows, Hardware, Glazing.
Division 09 -	Finishes, Plaster and Gypsum Board, Ceilings, Flooring, Painting and Coating.
Division 10 -	Specialties, Compartments and Cubicles, Toilet, Bath, and Laundry Accessories, Safety Specialties, Emergency Aid Specialties, Fire Protection Specialties, Exterior Specialties, Security Mirrors and Domes.
Division 11 -	Equipment, Parking Control Equipment, Loading Dock Equipment, Security Equipment.
Division 13 -	Special Construction, Radiation Protection, Special Instrumentation, Seismic Instrumentation.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Power Distribution Units, Lighting, Interior Lighting, Emergency Lighting, Exit Signs, Special Purpose Lighting, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Audio-Video Communications.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Electronic Surveillance, Video Surveillance, Electronic Personal Protection Systems, Electronic Detection and Alarm, Fire Detection and Alarm, Radiation Detection and Alarm, Fuel-Oil Detection and Alarm.
Division 31 -	Earthwork, Grading, Earthwork Methods, Soil Treatment, Soil Stabilization.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Planting, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Sanitary Sewerage Utilities, Storm Drainage Utilities, Fuel Distribution Utilities, Electrical Utilities, Electrical Utility Transmission and Distribution, Utility Substations, Utility Transformers, High-Voltage Switchgear and Protection Devices, Medium-Voltage Utility Switchgear and Protection Devices, Communications Utilities.
Division 41 -	Material Processing and Handling Equipment, Conveyors, Cranes and Hoists.
Division 46 -	Water and Wastewater Equipment.
Division 48 -	Electrical Power Generation, Common Work Results for Electrical Power Generation, Instrumentation and Control for Electrical Power Generation, Electrical Power Generation Equipment, Electrical Power Generation Testing.