Billingsport and Paulsboro Marine Terminal Water Main Project

The work associated with the Billingsport or “OFF-SITE” portion of the Project generally consists of the replacement of old, unlined, 2-inch, 4-inch and 6-inch diameter cast iron water main with approximately 4,100 LF of a new 16-inch and another 1,300 LF 12-, 10-, 8-, 6- and 4-inch diameter cement lined ductile iron pipe main the existing elevated water tank on Nassau Avenue to the Paulsboro Marine Terminal. The work also includes modification and completion of two large 2-way meter vaults, replacing all existing water services along the route, abandonment of the old mains, reconnection of all sanitary laterals, roadway restoration, and associated concrete restoration work. The work associated with the Paulsboro Marine Terminal or “ON-SITE” portion of the Project generally consists of installation of an approximately 10,300 LF of new 12- and 10-inch diameter cement lined ductile iron pipe to be constructed within the Paulsboro Marine Terminal property. This “ON-SITE” water main system is to be connected to the Borough of Paulsboro water system at the two valve vaults on Mantua Avenue. The work also includes restoration of roadways and unpaved areas impacted by the water utility improvements. This project is funded in part by the United States Department of Agriculture (USDA – Rural Development).

Division 33 -

Utilities, Instrumentation and Control for Utilities, Water Utilities, Water Utility Distribution Piping, Water Utility Distribution Equipment, Disinfecting of Water Utility Distribution, Water Utility Storage Tanks.