Corporate Hangar Build Out Project

The right is reserved by the Owner to reject any or all bids, to waive any informalities, and to award the Contract to serve the best interest of Owner The purpose of the geotechnical exploration was to evaluate general subsurface conditions within the proposed site, and to gather and present data relative to site preparation and foundation design for the proposed Corporate Hanger at the Stennis International Airport in Kiln, Mississippi. This work was conducted in accordance our proposal number Q1-18113 dated July 12, 2018. The following items were included as part of our scope of work: We understand that the project will consist of the design and construction of a new Corporate Hanger at the Stennis Airport in Kiln, Mississippi. The new hanger will be approximately 12,000 square feet (100 x 120) and will have an adjacent concrete apron with an area of approximately 1,350 square yards. The apron will be poured concrete pavement with similar buildup as the existing apron. Site grading is expected to be minimum with maximum cut and fills of 3 feet are less from existing site grades.

Division 03 -	Concrete, Concrete Forming, Structural Cast-in-Place Concrete Forming, Concrete Reinforcing.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing.
Division 09 -	Finishes, Painting.
Division 10 -	Specialties, Fire Protection Specialties, Fire Protection Cabinets, Fire Extinguishers.
Division 13 -	Special Construction, Fabricated Engineered Structures, Metal Building Systems.
Division 21 -	Fire Suppression.
Division 31 -	Earthwork, Site Clearing, Grading.
Division 32 -	Exterior Improvements, Rigid Paving, Concrete Paving, Fences and Gates.
Division 33 -	Utilities, Storm Drainage Utilities.