Texas Water Treatment Plant Rehabilitation 2022 Bond Project

Replace three existing pneumatic actuated butterfly valves with new electric actuated butterfly valves. 1. Coordinate with plant operators to remove existing clarifier from service. 2. Abandon existing air piping. Plug existing piping at blower header. 3. Remove existing pneumatic actuators and butterfly valves. Replace existing butterfly valves with new 4-inch Pratt 2FII AWWA Butterfly valves with Beck electric (open/close) actuators. 4. New actuators will be powered from existing 120V power from circuits in Blow Down Valve Actuator Feeder Panel located in Filter Gallery. 5. New actuators will be controlled using existing 4-20mA control wiring from Filter Control Room. Install support beam as shown mounted on top of existing concrete and support existing piping and new valves and fittings. Clean and paint all new and existing piping and valves. Replace three existing pneumatic actuated butterfly valves with new electric actuated butterfly valves. 1. Coordinate with plant operators to remove existing clarifier from service. 2. Abandon existing air piping. Plug existing piping at blower header. 3. Remove existing pneumatic actuators and butterfly valves. Replace existing butterfly valves with new 4-inch Pratt 2FII AWWA Butterfly valves with Beck electric (open/close) actuators. 4. New actuators will be powered from existing 120V power from circuits in Blow Down Valve Actuator Feeder Panel located in Filter Gallery. 5. New actuators will be controlled using existing 4-20mA control wiring from Filter Control Room. Replacement and installation of four existing differential pressure transmitters for the existing venturi meters with new Rosemount Differential Pressure Transmitters (3051CD2A02A1AM4D4S6H2BAQ4) including alternate flange, mounting bracket, and calibration. 1. Replace one differential pressure transmitter on the backwash piping meter. 2. Replace three differential pressure transmitter assemblies on each of the filter effluent venturi meters. Roof Support Structure 1. Construct a reinforced concrete grade beam as shown along the existing grade beam to support the roof support structure. 2. Construct a steel framed support structure using cold-formed steel structural framing members for column, joist, and purlins. The design shall be part of the roof design and independent of the walls of the structure and shall provide for the support of the roof and roof loads. The right is reserved by the City of Port Neches, Texas, as its interest may require, to accept or reject any or all bids, and to waive any informality in the bids received. All questions about the meaning or intent of the Bidding Documents are to be submitted to Engineer in writing. Interpretations or clarifications considered necessary by Engineer in response to such questions will be issued by Addenda mailed or delivered to all parties recorded by Engineer as having received the Bidding Documents. Questions received less than ten days prior to the date for opening of Bids may not be answered. Only questions answered by Addenda will be binding. Oral and other interpretations or clarifications will be without legal effect.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows, Hardware.
Division 09 -	Finishes, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Emergency Aid Specialties, Fire Protection Specialties, Storage Assemblies.
Division 11 -	Equipment, Laboratory Equipment.
Division 14 -	Conveying Equipment.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Common Work Results for Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.