Install Outriggers/Wire, Bldg 1721

Install Outriggers/Wire: - Chain link fence is approximately 130 feet long. - Add an additional chain link fence with outriggers around fire station plastic fencing (see attached drawing for reference). - Install concrete terminal post footings and concrete line post footings. Concrete terminal post footings and concrete line post footings shall be 36” deep and 12” in diameter. (3”) terminal posts shall be installed at the beginning, in the center, and at the end of the length of fence to be installed. (2-3/8”) line posts shall be installed equally spaced between the terminals posts and spacing shall be no greater than eight feet on center. - Pour concrete terminal post and concrete line post. - Install (3”) terminal posts and (2-3/8”) line posts. All fence posts shall be installed plumb and all fence posts shall be aligned in a straight line. - Install approx. 130 feet of chain link fence and all necessary hardware which shall include but not limited to top rails, caps, tension bars, tension clips, stretcher bars, bottom rails, nuts, bolts, washers. - Field verify measurements. - New fencing to match existing. - This includes 3 gates 1 20 ft. and 2 10 ft. - Install triple strand outriggers to top of fencing and 3 gates. - Dig Safe is required for this project .

Division 27 -	Communications, Common Work Results for Communications.
Division 28 -	Electronic Safety and Security, Common Work Results for Electronic Safety and Security.