Similar Projects
| Last Updated | 12/28/2021 03:56 PM |
| Project Title | Rehabilitate Armory and Storage Building - Plumbing Work |
| Physical Address | View project details and contacts |
| City, State (County) | Bronx, NY 10468 (Bronx County) |
| Category(s) | Single Trades |
| Sub-Category(s) | Plumbing |
| Contracting Method | Competitive Bids. |
| Project Status | Results |
| Bids Due | View project details and contacts |
| Estimated Value | $500,000 to $1,000,000 |
| Plans Available from | |
| Owner | View project details and contacts |
| Architect | View project details and contacts |
| Description | Thoroughly clean pipe and tubing prior to installation. During installation, prevent foreign matter from entering systems. Prevent if possible and remove stoppages or obstructions from piping and systems. PRESSURE TESTS - PIPING . Piping shall be tight under test and shall not show loss in pressure or visible leaks, during test operations or after the minimum duration of time as specified. Remove piping which is not tight under test; remake joints and repeat test until no leaks occur. Water Systems Domestic water (potable cold, domestic hot and recirculation) inside buildings Before fixtures, faucets, trim and accessories are connected, perform hydrostatic test at 125 psig minimum for 4 hours. b. After fixtures, faucets, trim and accessories are connected, perform hydrostatic retest at 75 psig for 4 hours. |
||
| Details |
|
||
| Bidder's List | View project details and contacts | ||
| Prospective Bidders | View project details and contacts | ||
| Project Documents |
 Engineered Spec Sheet  Architectural Plans  Other Documents |
