County Road 36 Replacement of Culverts 32 and 36

Work under this Contract will include replacement of two existing culverts with new concrete box culverts and cast in place concrete wing walls. The work will also include hot mix asphalt paving, guide rail installation, driveway reconstruction, drainage and other incidental construction necessary for completion of the project. The Contractor’s attention is called to the close proximity of utilities at the project site. The scope of this work includes, but is not limited to the following: 1. Provide, maintain and remove temporary erosion control measures 2. Clearing and grubbing highway right-of-way and work area 3. Maintain and protect traffic for the duration of the project in conformance with NYSDOT and MUTCD requirements 4. Preserving, maintaining and relocating existing signs 5. Locating, preserving and protecting existing utilities at all times 6. Maintain stormwater flows 7. Remove existing wing walls & culverts 8. Install new wing walls, culverts and backfill 9. Drainage improvements 10. Construction of new road and shoulders 11. Cold mill pavement & rebates between existing and proposed pavements 12. Construction hot mix asphalt concrete pavements and shoulders to the line and grades 13. Laying out and applying permanent pavement markings 14. Placing shoulder backup material to the proper lines and grades 15. Installation of guide railing systems 16. Restoration of all driveways and property disturbed by construction 17. Turf establishment 18. Incidental work necessary to completely and satisfactorily construct the project.

Division 31 -	Earthwork, Erosion and Sedimentation Controls.
Division 33 -	Utilities, Storm Drainage Utilities, Ponds and Reservoirs.
Division 35 -	Waterway and Marine Construction.