Utility Cuts - Asphalt and Concrete Patches

Utility cut repair of damaged asphalt: The work will consist of removal of any base material or temporary asphalt material and the placement of a permanent asphalt repair on utility cuts generated by Water Services Department at various locations throughout the city. 1. All deteriorated or damaged asphalt shall be removed and replaced with permanent asphalt at various locations throughout the city. 2. Asphalt repair and replacement shall be incompliance with Mag 321 Placement and Construction of Asphalt Concrete Pavement, MAG 336 Pavement Matching and Surfacing Replacement. 3. Asphalt repair and replacement over 3-inches in thickness shall be compensated at an additional cost per inch, at a unit cost per square foot. 4. Asphalt pavement shall be saw-cut with equipment approved by the Public Works Inspector. The trimmed edges should be tacked with asphalt cement prior to the placement of new asphalt concrete. 5. Pavement material shall be removed and replaced to depth equal to the existing pavement section or to a minimum depth of 3-inches, whichever is greater. 6. Single lift pavements shall be compacted with a vibratory roller per MAG standard specifications. Where deep lift asphalt concrete exists, the base shall be placed in lifts not exceeding 2 ½ inches in compacted thickness until the finished grade is achieved. 7. Asphalt concrete used shall be an approved City of Phoenix asphalt design. 8. Payment shall be made at the contract unit price awarded contract. Work shall include all materials, labor, equipment and incidentals necessary to complete the work.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 32 -	Exterior Improvements, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Paving Specialties, Pavement Markings.
Division 33 -	Utilities, Storm Drainage Utilities, Storm Drainage Structures.