Similar Projects
2021 Additions and Renovations North Forrest Vocational Building
Addition, Demolition, Renovation, Infrastructure
Post-Bid
$900,000 CJ est. value
Hattiesburg, MS 39401

Renovate Bryan Hall
Renovation
Bidding
$10,000,000 CJ est. value
Biloxi, MS 39534

Meridian High School / Ross Collins - 2022 Bond Projects - Meridian Public School District
Renovation, Infrastructure
Pending Verification
$5,000,000 CJ est. value
Meridian, MS 39301

ESSER Upgrades And Improvements At North Panola Career And Technical Center
Renovation
Results
$1,565,000 CJ est. value
Como, MS 38619

Last Updated 02/06/2023 05:35 PM
Project Title

RFQ D/B - Magnolia Hall Renovations at the Gulfport Job Corps Center

Physical Address View project details and contacts
City, State (County) Gulfport, MS 39501   (Harrison County)
Category(s) Education
Sub-Category(s) Vocational School
Contracting Method Competitive Bids
Project Status Feasibility Study, Request for Qualifications, Construction start expected May 2023
Bids Due View project details and contacts
Estimated Value $5,000,000 [brand] Estimate
Plans Available from Agency's Affiliate
Owner View project details and contacts
Architect View project details and contacts
Description

As of February 6, 2023, this is a sources-sought notice that is used by the owner for market survey research information only. At this time, it is not known when a solicitation will be issue or when construction is anticipated to begin. Closed sources-sought notice has been included below for reference. ............ The US Department of Labor, Office of Job Corps, has a requirement for a qualified firm to provide design/build services for the Renovation of Magnolia Hall at the Gulfport Job Corps Center located in Gulfport, Mississippi. THIS IS A SOURCES SOUGHT NOTICE. In accordance with the Federal Acquisition Regulation (FAR) 10.002(b)(i), this notice is issued for the purpose of market research. Market research is being conducted to determine if there are potential businesses with the capacity and experience to perform the required work. This is a request for information and not a request for proposal; submission of any information in response to this market survey is purely voluntary. The government will assume no financial responsibility for any costs incurred. The full extent of the required services will be described in the solicitation, which may follow at a later date. However, a summary of the services is provided as follows. The work involves design-build (design and construction) services for restoration of the interior water and mold damaged of Building 10, Magnolia Hall. Work includes, but is not limited to: Interior renovation: remove and replace ceilings both gypsum wall board and drop ceilings; attic insulation, floors, carpet, vinyl, and ceramic tile; all interior doors, exterior doors less aluminum store front entry systems; remove and replace all exterior windows less storefront entry system; interior mechanical systems and duct work including duct and pipe insulation; interior electrical devices and panel boards (lights, electrical plugs); interior fire alarm devices and central annunciator system; clean and paint interior masonry demising walls. Exterior Repair: repair/replace masonry walls as required to remove and install new steel fire labeled frames. Repair walls to match existing wall mortar joints, and cleaning of masonry veneer walls. Design, repair/replacement details for windowsills and lintels, and sequence of work. All masonry repairs to match existing brick and mortar size, shapes, and colors. The estimated price range is between $1,000,000 and $5,000,000. Firms interested in this requirement are requested to submit a statement of qualifications. Your statement of qualifications should demonstrate the capacity of your firm to provide the services described above, and shall include the following information: 1. Previous projects of similar scope and value Your statement of qualifications should include two or more design-build building rehabilitation projects with a $1M to $5M constructed value completed within the last five years. Include one or more projects encompassing mold remediation performed within the last five years. Your submission shall also demonstrate previous experience on projects using exterior tile work as a building facade component. The location of the project (City, State), the project owner, a brief and concise description of the project scope, specialty design consultants employed, a comparison of the construction budget versus construction award value, and the final contract amount should be included with your submission. 2. Cost control, project schedule, safety, and quality of work Your statement of qualification should also highlight a proven record of excellent performance by completing projects on or ahead of time. Include the Contract Award/NTP date, the original contract completion date, and the actual contract completion date for each project. Using your previous project examples provide the contract award amount, the final contract value, and a percentage of change order value relative to the total construction value for each project to demonstrate a proven record of excellent performance in reducing cost and completing projects on or below budget. 3. Provide your established Safety and Quality Control procedures and protocols consistently applied to all projects. 4. Financial Capabilities Your bonding capacity shall be included with your submission. Please include your aggregate and per project bonding, capacity limits. The government will evaluate market information to ascertain potential market capacity to 1) provide services consistent in scope and scale with those described in this notice and otherwise anticipated; and 2) secure and apply the full range of corporate financial, human capital, and technical resources required to successfully perform similar requirements. Your submission should not exceed ten pages. Your response to this Notice is due no later than Wednesday June 15, 2022, by 2:00pm EDT and shall be submitted to Eileen Garnett, Contract Specialist, US Department of Labor/OASAM/OSPE/JCAS, A/E and Construction, garnett.eileen@dol.gov. HUBZone, small disabled veterans, small disadvantaged, 8(a) certified, women owned, and large business concerns are encouraged to submit a response to this notice. The NAICS Code for this requirement is 236220. Acknowledgement of responses will not be made, nor will respondents be notified regarding the results of the Government's evaluation of the information received. The determination to proceed with the acquisition is at the discretion of the Government. Telephone inquiries will not be accepted. A prospective Offeror interested in obtaining a contract award with the Government must be registered in the System for Award Management. Additional information regarding contractor registration can be obtained through the following website, www.SAM.gov. The method of contractor selection has not been determined at this time. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.

Details

Division 02 - Existing Conditions, Demolition, Selective Demolition, Selective Interior Demolition.
Division 03 - Concrete, Concrete Forming and Accessories, Cast-in-Place Concrete, Precast Concrete.
Division 04 - Masonry, Unit Masonry.
Division 05 - Metals.
Division 06 - Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry.
Division 07 - Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 - Openings, Doors and Frames, Specialty Doors and Frames, Entrances, Storefronts, and Curtain Walls, Windows, Hardware.
Division 09 - Finishes, Plaster and Gypsum Board, Tiling, Ceilings, Flooring, Resilient Flooring, Carpeting, Painting and Coating, Painting.
Division 10 - Specialties, Visual Display Units, Chalkboards, Markerboards, Tackboards, Signage, Compartments and Cubicles, Toilet, Bath, and Laundry Accessories, Toilet Accessories, Emergency Aid Specialties, Fire Protection Specialties, Lockers, Flagpoles.
Division 11 - Equipment, Foodservice Equipment, Foodservice Storage Equipment, Food Preparation Equipment, Food Delivery Carts and Conveyors, Food Cooking Equipment, Food Dispensing Equipment, Ice Machines, Educational and Scientific Equipment, Audio-Visual Equipment, Play Field Equipment and Structures.
Division 12 - Furnishings, Casework, Countertops, Office Furniture, Institutional Furniture, Classroom Furniture.
Division 21 - Fire Suppression.
Division 22 - Plumbing, Common Work Results for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures, Drinking Fountains and Water Coolers.
Division 23 - Heating, Ventilating, and Air Conditioning (HVAC), Common Work Results for HVAC, Instrumentation and Control for HVAC, HVAC Air Distribution, Ventilation Hoods, Commercial-Kitchen Hoods.
Division 25 - Integrated Automation.
Division 26 - Electrical, Instrumentation and Control for Electrical Systems, Lighting, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 - Communications, Common Work Results for Communications, Structured Cabling, Voice Communications, Audio-Video Communications, Audio-Video Systems, Integrated Audio-Video Systems and Equipment, Integrated Audio-Video Systems and Equipment for Classrooms, Distributed Communications and Monitoring Systems.
Division 28 - Electronic Safety and Security, Common Work Results for Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Fire Detection and Alarm.
Division 31 - Earthwork, Common Work Results for Earthwork, Grading, Earthwork Methods, Soil Treatment.
Division 32 - Exterior Improvements, Flexible Paving, Rigid Paving, Fences and Gates, Irrigation, Planting, Turf and Grasses.
Division 33 - Utilities, Water Utilities, Sanitary Sewerage Utilities, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.

Bidder's List View project details and contacts
Prospective Bidders View project details and contacts
Project Documents
 Engineered Spec Sheet
 Architectural Plans
 Other Documents