Pecan Street Office Wing Roof Replacement

Work shall include, but not be limited to the following: engineering, design, permitting, fabrication, site work, and installation of a new mono-slope Galvalume roof system on a wing of an existing pre-engineered metal building. Building code compliance and permitting will be the responsibility of the bidder. Work shall include: 1. Removal and disposal of existing metal roof decking - 50’ x 152’-4” (plan view) approximately 7,710 Sq. Ft. (with entrance overhang) - Slope approximately 1/12 2. Removal and disposal of all Flashings, Rakes, Soffits, Fascia, Drip Edges and other appurtenances 3. Removal and disposal of all existing roof insulation. 4. Install new 3-inch Vinyl Reinforced (VR) R-10 (Min) insulation or better 5. Install new 26 Gauge.36" Wide, PBR Roofing Panel, R-Loc or Equivalent - Galvalume 6. Install all required new Panels, Flashings, Rakes, Soffits, Fascia, Drip Edges and other appurtenances 7. All connections and penetrations shall be made weather-tight per manufacture's specifications and by using approved closures, tapes, gaskets, boots and sealants.

Division 07 -

Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.