Road Milling/Cold Planing/Asphalt Concrete Excavation

Perform asphalt/concrete excavation by cold planer on town owned asphalt pavement. The contractor shall be responsible for excavating asphalt concrete pavement by cold planer. Depth of planing shall average 2 inches. The cold planer shall be equipped with a cutter drum at least 72 inches wide with an elevating device capable of loading milled material directly into trucks while operating and with dust control system capable of complying with environmental air quality standards. The contractor will be required to supply auxiliary milling equipment to clean up work along the curbs and around castings. Work areas shall be left clean and free from debris at the end of each workday. The use of planing equipment mounted on pneumatic tires will be permitted only for clean up work or in areas less than 10 feet wide The contractor will be responsible for damage to existing castings resulting from his operation unless such castings have previously been paved over, are not visible on the surface, and have not been marked out in the field by the Highway personnel.The Town of Dunstable reserves the right to salvage any material such as granite, brick, or millings.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 32 -	Exterior Improvements, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Paving Specialties, Pavement Markings.
Division 33 -	Utilities, Storm Drainage Utilities, Storm Drainage Structures.