Snake Meadow Hill Road, Jared Hall Hill Road, Margaret Henry Road and Barber Road

Tack coat and overlay the following: 1. Approximately 10,912 linear feet on Snake Meadow Hill Road from the Plainfield Town Line to the end of the new pavement, approximately 500 linear feet before the intersection with Gibson Hill Road. The road is approximately twenty feet (22’) in width. 2. Approximately 1,431 linear feet on Jared Hall Hill Road from the intersection with Snake Meadow Hill Road. The road is approximately twenty feet (20’) in width. 3. Approximately 12,859 linear feet on Margaret Henry Road in its entirety. The road is approximately twenty feet (24’) in width. 4. Approximately 1,644 linear feet on Barber Road from the intersection with Margaret Henry Road. The road is approximately twenty feet (20’) in width. 5. Supply and install leveling course over entire roadway; tack coat must be applied along the entirety of the road section(s) to be overlaid, and the overlay shall be one and one-half (1½) inches of compacted Class 1 bituminous concrete making sure that all ends are properly keyed with the old surface. All driveway aprons shall be paved to meet the new road.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 32 -	Exterior Improvements, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Paving Specialties, Pavement Markings.
Division 33 -	Utilities, Storm Drainage Utilities, Storm Drainage Structures.