Reported 02/25/2022 12:00 AM
Project Title

Above Ground Scale

Physical Address View project details and contacts
City, State (County) Smithfield, VA 23430   (Isle of Wight County)
Category(s) Single Trades
Sub-Category(s) Equipment
Contracting Method Competitive Bids.
Project Status Request for Proposals (RFPs)
Bids Due View project details and contacts
Estimated Value
Plans Available from Municipal Agency
Owner View project details and contacts
Architect View project details and contacts
Description

The contractor shall provide all labor, supervision, equipment, tools, materials and incidentals necessary to furnish and install one (1) above ground scale in accordance with the specifications herein. All equipment, materials and installation work shall comply with this specification, the Virginia OSHA Standards, and the Virginia Uniform Statewide Building Codes. 1. Install one (1) above ground scale at the Isle of Wight Transfer Station, 13191 Foursquare Rd Smithfield, VA 23430 2. The total price submitted shall include the removal of existing scale, new scale price, installation, calibration, freight, required permits, additional support for the mounting of equipment and any equipment necessary to complete the job such as crane rental. This is to be a turn-key job. 3. Minimum requirements shall include the following: (a) 11’ x 70’ above ground truck scale. (b) Minimum 90,000 LB concentrated load and 200,000 LB total load. (c) Above ground pier foundation with washout slabs between piers. (d) Digital Communication between instrument and load cells. (e) Onscreen Integrated traffic Control. (f) Ticket printer. (g) Safety Yellow Guide Rails. (h) Stainless steel sheathing on all cabling. (i) Moisture/Dust and rodent control. (j) Diagnostic and monitoring capabilities. (k) Advanced Surge protection. (l) Include all cables and materials necessary to connect to existing system. (m) USB output for connection for existing scale software to automatically capture and process truck weight. RS232C data Outputs, Ethernet and USB connectivity. (n) Scale must be compatible with existing software system. Software in use is Paradigm Weigh Station. (o) Scales must be fully automated. (p) Entry and exit ramp guardrails.

Details

Division 10 - Specialties, Scales.
Division 41 - Material Processing and Handling Equipment, Batching Equipment, Weigh Scales.

Bidder's List View project details and contacts
Prospective Bidders View project details and contacts
Project Documents
 Engineered Spec Sheet
 Architectural Plans
 Other Documents