RFQ Design - Lee C. Fine and Grand Glaize Airport, Airport Engineering Consultants

The City of Osage Beach, Missouri (Sponsor), is here by soliciting statements of qualifications and experience from qualified consultants for airfield development projects at Lee C. Fine and Grand Glaize Airports. Projects may be subject to future receipt of Federal funding under the Federal Aviation Administration (FAA) Airport Improvement Program, as administered by the Missouri Department of Transportation (MoDOT) through the State Block Grant Program. These projects may include the following: Engineering Ad Consultant Selection: 1. Lee C. Fine Airport - Runway pavement rehabilitation, maintenance, earthwork, and improvements, i.e.,crack-fill, sealcoat, overlay, grading, marking, etc. Estimated Cost $3,900,000 2. Lee C. Fine Airport Entrance Road and Parking Lot - Pavement rehabilitation, maintenance, earthwork, andimprovements, i.e., crack-fill, sealcoat, overlay, grading, marking, etc. - Estimated Cost $100,000 3. Lee C. Fine Airport Hanger Expansion - Estimated Cost $1,000,000 4. Lee C. Fine Airport New Terminal Building - Estimated Cost $1,000,000 5. Grand Glaize Airport Underground Cable Burial - Estimated Cost $650,000 6. Grand Glaize Airport Taxiway pavement rehabilitation, maintenance, earthwork, and improvements, i.e., crack-fill, sealcoat, overlay, grading, marking, etc. - Estimated Cost $300,000 TThe required services included, but are not limited to, engineering for preliminary, design, bidding, and construction phases and incidental special services including geotechnical, preparing categorical exclusion documentation, as-built ALP updates, and surveying. The consultant should provide the name(s) of preferred firm(s) for any work which is likely to sub-consulted. Sub-consultant changes can occur with Sponsor approval. At the Sponsor's discretion, this selection can be retained for projects initiated within five years or until all projects are complete. Projects other than those listed above will require a new solicitation except as allowed in FAA Advisory Circular 150/5100-14 paragraph 2.7.2 (4). Disclosure: Under a previous agreement, Crawford Murphy & Tilly Inc assisted the Sponsor with preparation of their CIP and the above cost estimates. FFees will be negotiated for projects as federal funds become available. Consultants shall not include fee or cost information when responding to this solicitation. Prospective consultants are advised that applied overhead rates must be in accordance with the cost principles established within Federal Regulation 48 CFR Part 31, Contract Cost Principles and Procedures. After selection, the successful firm will be required to submit a copy of their current overhead rate audit certification or MoDOT pre-qualification. The agreement(s) between the Sponsor and the selected consultant will be subject to all applicable Federal Rules and Regulations as identified in AC 150/5100-14E. The most current version of the Federal Contract Provisions for A/E agreements will be included in each agreement. The consultant should also provide an affidavit of compliance with the federal work authorization program and a copy of the firm's EVerify Memorandum of Understanding (15 CSR 60-15.020). Questions regarding this solicitation can be directed to Trevor Pulley at 573-624-5959. The method of contractor selection has not been determined at this time. MODOT - RFQ Design - Lee C. Fine and Grand Glaize Airport, Airport Engineering Consultant

Division 03 -	Concrete, Concrete Forming, Cast-in-Place Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing.
Division 06 -	Wood, Plastics, and Composites.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Weather Barriers.
Division 08 -	Openings, Doors and Frames, Coiling Doors and Grilles, Entrances and Storefronts, Windows, Special Function Windows, Security Windows, Access Control Hardware, Louvers and Vents.
Division 09 -	Finishes, Plaster and Gypsum Board, Tiling, Ceilings, Resilient Flooring, Carpeting, Acoustic Treatment, Painting.
Division 10 -	Specialties, Visual Display Units, Directories, Signage, Telephone Specialties, Compartments and Cubicles, Toilet Compartments, Emergency Aid Specialties, Fire Protection Specialties, Fire Protection Cabinets, Fire Extinguishers, Lockers, Storage Assemblies, Protective Covers, Flagpoles, Pest Control Devices, Flags and Banners, Security Mirrors and Domes.
Division 11 -	Equipment, Loading Dock Equipment, Loading Dock Bumpers, Stationary Loading Dock Equipment, Portable Dock Equipment, Loading Dock Lights, Foodservice Equipment, Foodservice Storage Equipment, Food Preparation Equipment, Food Cooking Equipment, Food Dispensing Equipment, Ice Machines, Cleaning and Disposal Equipment.
Division 12 -	Furnishings, Art, Casework, Seating.
Division 14 -	Conveying Equipment.
Division 21 -	Fire Suppression, Instrumentation and Control for Fire-Suppression Systems, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures, Drinking Fountains and Water Coolers.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC.
Division 25 -	Integrated Automation.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Packaged Generator Assemblies, Engine Generators, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting, Lighting Poles and Standards, Parking Lighting, Site Lighting, Walkway Lighting, Flood Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Audio-Video Communications, Distributed Audio-Video Communications Systems, Paging Systems, Public Address Systems, Intercommunications and Program Systems.
Division 28 -	Electronic Safety and Security.
Division 31 -	Earthwork, Site Clearing, Grading, Soil Treatment.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways, Paving Specialties, Parking Bumpers, Speed Bumps, Pavement Markings, Tactile Warning Surfacing, Fences and Gates.
Division 33 -	Utilities, Water Utilities, Sanitary Sewerage Utilities, Storm Drainage Utilities.
Division 34 -	Transportation.
Division 35 -	Waterway and Marine Construction.
Division 41 -	Material Processing and Handling Equipment, Conveyors.