SCSU-20 Heat Plant Roof and Suppression System

Construction of the Heating Plant Roof and Fire Suppression project located at Saint Cloud State University; including the following major items of work: 1. General construction work includes the following major work items: Work associated with re-roofing the entire building including complete removal of existing roof to structural deck and replacement with new roof assembly and associated flashings, roof hatch, roof access ladders, railings, downspouts and accessories. 2. Masonry repair includes removal and cleaning of biological growth and efflorescence, patching of masonry units, cleaning and resetting masonry units. All areas scopes are defined on the drawings. Further masonry scope includes removal and replacement of compromised masonry units and repointing of building areas as identified on the drawings. Due to extensive cracking a portion of the southwest corner of the building will be reconstructed. Sealant work at exterior walls includes removing and replacing sealant around openings and in joints. At large knockout panels on the west, south and east elevations as show on the drawings, sealant should be removed from the perimeter of the panels and replaced. Cleaning and repair of metals at building exterior such as lintels is also outlined in the drawings. 3. Work to restore finishes, create new partition, create new exterior door associated with other interior work including fire protection work. 4. Civil/site construction work includes the following major work items: Excavation for and installation of new water service main to serve fire protection service and associated restoration of pavements. 5. Mechanical construction work includes the following major work items: Replacement and or temporary relocation of roof top mounted mechanical units for the purposes of re-roofing the full extent of the building. Replacement of roof drain bodies and modification of scuppers. Modification of exhaust piping above roof level for the purposes of complying with OSHA clearances. Work related to new water service main to serve fire protection services. 6. Electrical construction work includes the following major work items: Work to support new or temporarily relocated roof top mechanical equipment. Work associated with new Fire Alarm panel and devices. 7. Fire Protection construction work includes the following major work items: Installation of new fire suppression system serving entire building including valves, piping, heads and accessories.

Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 21 -	Fire Suppression.
Division 28 -	Electronic Safety and Security, Fire Detection and Alarm.