Hagood Mill Bridge

Construction of pre-stressed Portland concrete bridge deck members. These bridge components shall meet all applicable current SCDOT standards and specifications. 1. There will be 9 cored bridge slabs 45 foot in length, produced for the bridge to give a 27 foot width. 2. Slabs will use 8000 psi concrete in their production 3. There will be 90 feet of barrier rail included. 4. Bearing pads for the bridge and barrier rail included. Bearing pads for the bridge and barrier rail will be approximately 6 inches wide and the proper length to fit the dimensions. 5. Post tensioning cables will be used to secure the bridge; all cables, plates, and chucks needed for securement will be included in the price. 6. Grout needed for keyway between the slabs will be included in the price. 7. Hardware to connect the barrier rail to the bridge slab shall be provided and included in the price. 8. Removable stranded steel cable lifters to the lift the labs into position that can be removed upon placement of the slabs shall be included. 9. Pickens County will require shop drawings based on current SCDOT Standard Drawings for 3'-0" x l'-9" cored slabs and barrier walls. These drawings will be submitted for approval 30 days before fabrication of deck members begin. 10. Delivery will be FOB Destination to 138 Hagood Mill Road Pickens SC 29672. The delivery cost is to be included in the price. 11. Please include all applicable taxes in the bid price.

Bridge, New Construction.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 03 -	Concrete, Concrete Reinforcing, Precast Structural Concrete.
Division 05 -	Metals, Structural Steel Framing, Structural Steel for Bridges, Steel Joist Framing, Steel Joist Girder Framing.
Division 07 -	Thermal and Moisture Protection, Expansion Control.
Division 09 -	Finishes, High-Performance Coatings.
Division 10 -	Specialties, Signage, Traffic Signage.
Division 26 -	Electrical, Exterior Lighting, Lighting Poles and Standards, Roadway Lighting.
Division 31 -	Earthwork, Embankments, Erosion and Sedimentation Controls, Slope Protection, Gabions, Riprap, Special Foundations and Load-Bearing Elements, Driven Piles.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Fences and Gates, Retaining Walls.
Division 34 -	Transportation, Bridges.