Howard Hall Cafe and Admin A/C Replacement

Contractor shall remove and dispose of the one existing 10 ton condenser, air handler, and four ptact type units. The contractor shall supply and install one 10 ton heat pump condenser with matching air handler. The air handler shall have 15 KW heat strips. The system shall have a new thermostat supplied by the contractor. The contractor shall supply and install four 7,000 BTU Amana ptact units. The ptact units shall be install per manufacture install guide and shall have a concrete pad formed underneath them at least 1.5 inches thick. The contractor is responsible for enlarging the opening in the wall for the units. New conduit and power wire from the new disconnect to the new units. The new units shall match existing equipment’s Btu, voltage and phase. All duct work shall be sealed with mastic. All work will be done by code. The contractor shall be responsible for all permits and fees.

Division 23 -

Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution, Central HVAC Equipment.