Similar Projects
| Reported | 10/10/2019 12:00 AM |
| Project Title | Golf Course Barrier Netting |
| Physical Address | View project details and contacts |
| City, State (County) | TX (Bexar County) |
| Category(s) | Single Trades |
| Sub-Category(s) | Finishes/Exterior |
| Contracting Method | Competitive Bids. |
| Project Status | Accepting Letters of Interest |
| Bids Due | View project details and contacts |
| Estimated Value | |
| Plans Available from | Federal Agency |
| Owner | View project details and contacts |
| Architect | View project details and contacts |
| Description | Poles: All poles need to be treated wooden utility poles set 8 to 10 feet deep with backfill tamped. All corner, end, and angle poles need to be anchored with galvanized steel screw-in or bust-out type anchors using 3/8" aircraft cable. Guy wires will be marked with yellow safety covers. Netting: Hybrid 450'L x 30'H range barrier netting sewn-in 3/8 poly-rope border attached to support system using galvanized snap hooks and shackles. Cables: 3/8 galvanized steel aircraft cable (MBS @ 14,400 lbs SPEC: MIL-W-83420D) to be used for top and bottom supports. 5/16 galvanized steel aircraft cable PVC coated to 3/8 (MBS @ 14,400 lbs SPEC: MIL-W-83420D) to be used for horizontal rib lines and vertical supports. Coating must be black. Option: Install 2' high black, vinyl coated mini-mesh chain-link fabric at bottom of netting to protect it from ball pickers and maintenance equipment. | ||||
| Details |
|
||||
| Bidder's List | View project details and contacts | ||||
| Prospective Bidders | View project details and contacts | ||||
| Project Documents |
 Engineered Spec Sheet  Architectural Plans  Other Documents |
