Bay Park Sewage Treatment Plant Permanent Hot Water/chilled Water Piping System Capital Project

The principal features of the work to be performed under this contract consist of all labor, equipment, fees, Permits, and other related costs necessary for excavations for below and above ground hot and chilled water piping systems and associated appurtenances located across the Bay Park STP site, etc. as described in the Contract Documents. This project shall be administered under a Project Labor Agreement. In order to comply with New York State Executive Order 202.11, which reads, in part: "I hereby temporarily suspend or modify, for the period from the date of this Executive Order the following: Section 103(2) of the General Municipal Law, Section 144(1) of the State Finance Law, Section 376(8)(a) of the Education Law, and Section 359(1) of the Public Authorities Law to the extent necessary to allow the non-public opening of bids; provided, however, that, where practical, public entities shall record or live stream bid openings so that the public has the opportunity to view such bid openings;" No public, including vendors, will be allowed to be present for the bid opening for the aboveidentified contract scheduled to take place at 1550 Franklin Ave. in Mineola at 10:30 AM Upon receipt of vendors' bids, the County will open and read aloud said bids at 1550 Franklin, to which the vendors can call in and remotely participate. Vendors are still required to submit bids prior to 10:30 AM at the Clerk of the Legislature. The instructions are indicated below: Join online meeting (web, audio): https://otconference.nassaucountyny.gov:443/call/0142148 Join by phone: +1-516-572-2631 OR dial 22631 internally: Access codes: 0142148 Participant Any questions regarding this project shall be submitted via email prior to 4 PM, February 23, 2022, to Christopher Vella at cvella@nassaucountyny.gov. The STP is located at the intersection of Compton Street and Marjorie Lane, in East Rockaway, New York. No interpretation of the meaning of the Drawings, Specifications or other Contract Documents will be made to any Bidder orally. Prospective bidders must request in writing such interpretation from the Commissioner and such interpretation will be given in writing in the form of written addenda, to all prospective bidders, in accordance with the Instructions to Bidders, Item G. This Contract will be subject to Nassau County Local Laws No. 14-2002, "Participation by Minority Group Members and Women in Nassau County Contracts," which requires submission of a Utilization plan prior to the award of a County contract, No. 2-2016, "Participation of Service-Disabled Veterans in County Contracts," and No. 9-2002, as amended by No. 3-2015, which require that firms entering into contracts with Nassau County must participate in registered and approved apprenticeship training programs unless such requirement are supplanted by requirements specified in the bidding instructions. At the time of bid submission, the Contractor shall submit, as part of its bid, documents in compliance with Title 51 of the Nassau County Miscellaneous Laws demonstrating participation in approved apprenticeship training programs that are appropriate for the type and scope of work to be performed pursuant to the Contract. Such apprenticeship training programs appropriate for the scope of this Contract shall include, but are not limited to the following: Laborers, Electricians, Carpenter, Operating Engineer, Plumber or any other trade appropriate for the type of work proposed. The apprenticeship training programs shall be registered with, and approved by, the New York State Commissioner of Labor in accordance with Article 23 of the New York State Labor Law. Note that if the Contractor does not comply with these requirements, the Commissioner may declare the Contractor's bid proposal nonresponsive and award the Contract to the next lowest responsibleBidder. SUBCONTRACTOR LISTS - In accordance with GML 101, for projects (1) to which a project labor agreement applies, (Labor Law Section 222) and, additionally, (2) on a public work contract for which separate specifications have not been prepared, each Bidder shall submit with its bid a separate sealed list on the forms provided with the proposal forms that names each subcontractor (for the following enumerated work, if applicable) that the Bidder intends to use to perform work on the contract, and the agreed-upon amount to be paid to each, for: (1) plumbing and gas fitting, (2) steam heating, hot water heating, ventilating and air conditioning apparatus and (3) electric wiring and standard illuminating fixtures. Notwithstanding the forgoing, all subcontractors must be approved by the Commissioner in writing prior to such subcontractor's performance of any work In order to submit a bid, a non-refundable fee of 300.00 by check or money order, payable to the Nassau County Treasurer, will be required for each set of Bid Contract Documents purchased from the Permit Office. Prospective bidders requesting Contract Documents by mail must remit an H2 additional, non-refundable, fee of 30.00 per set to cover handling and first-class mailing. ONLY BID CONTRACT DOCUMENTS PURCHASED FROM THE PERMIT OFFICE IN THIS MANNER WILL BE ACCEPTED/CONSIDERED. Vendors doing business with Nassau County, including those responding to this solicitation, must register with the County. The Nassau County Bid Solicitation Boards are open to all registered vendors. Vendors that have not registered are able to view open solicitation opportunities, but they are not able to download solicitation documents or submit bids or proposals. Security for Bid as set forth herein must be presented with the Bid. "FAILURE TO PROVIDE THE REQUIRED SECURITY WILL RENDER THE BIDDER NONRESPONSIVE AND THE BID WILL NOT BE ACCEPTED, OPENED OR READ ALOUD. IN ADDITION, FAILURE TO PROVIDE THE REQUIRED SUBCONTRACTOR INFORMATION AT THE TIME OF BID OPENING MAY RENDER THE BIDDER NON- RESPONSIVE

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows, Hardware.
Division 09 -	Finishes, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Emergency Aid Specialties, Fire Protection Specialties, Storage Assemblies.
Division 11 -	Equipment, Laboratory Equipment.
Division 14 -	Conveying Equipment.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution, Central HVAC Equipment.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.