54--Equipment Shed

Prefabricated skid mounted Shed Must meet following specifications- 16'x40', Green metal roof, roof must have screened vented ridge and vented aluminum soffit. All rafters must be hurricane clipped. Floors must be framed with pressure treated 2"x6" and sheeted with 2 layers of 3/4" plywood. Walls must be 2"x4" framed 16" on center, hurricane clips every 16", with 5/8" T1-11 Exterior sheeting. Exterior of sheeting must be painted Tan in color, with an exterior latex paint. 8'wide x min 80" tall roll up door and 36"x80" door with built in window. Two 24"x36" windows, (single hung, double pane, low E, with screen) for more light are required, 1 window located mid way on both long sides. Both doors must be located on 1 of the 16' walls. 8' wide ramp with traction surface must be provided to allow entry of wheeled equipment into and out of shed at no more than 10 degree slope. PLEASE NOTE, Final Assembly must be done on site, Access to site is limited to 9' width.

Division 01 -

General Requirements, Construction Facilities, Field Offices and Sheds.