Main Pump Station Renovation - Electrical Work

This work includes all labor, materials, equipment and services for a complete electrical system. Work includes, but is not limited to the following: 1. Electrical equipment and grounding systems. 2. Demolish existing equipment as shown on the drawings or as required for a complete, safe and workable system. 3. Furnish and install electrical devices as required by National Electrical Code 4. Furnish and install molded case circuit breaker(s) to retrofit existing switchboard, raceways, conductors, boxes/enclosures, grounding, equipment, variable speed motor controllers, panelboards, dry type transformer, surge protective device(s), control panel, fan, louver/damper, electric unit heater(s), luminears, switches, receptacles, and instruments. 5. Make interconnections to equipment including switchboard, pumps, variable speed motor controllers, luminaires, transformers, control panels, fans, damper actuators, and switrches. Provide raceways and conductors to interface with existing devices as shown on the drawings. 6. Fabricate underground Ductbank system as shown on the drawings. 7. Furnish and install electrical connections complete to all equipment whether indicated on the plans or not to accomplish a fully functional electrical system as described herein. 8. Provide electrical studies including arc flash hazard analysis and short circuit study. 9. Provide labeling and marking for all new raceways and equipment. 10.Test all electrical systems to the satisfaction of the Engineer

Division 26 -

Electrical.