Solid Waste and Recycling Removal Services -FCI Ray Brook

The contractor shall provide all equipment, labor, and expertise required, and shall install all equipment at its own expense to fulfill the requirements of this Statement of Work. The following equipment and related supplies must be provided: 1. Two (2) new /like new self-contained roll on/off compactor, with a size of 34-40 cubic yards. These compactors shall be water tight and contain hydraulic ram internally. These compactors shall be located inside the secure perimeter of the institution by the Recycling Center. One compactor shall be used for solid waste collection and one compactor shall be used for recyclables collection Self-Contained Compactor Specifications: - 34-40 cubic yard container - Power unit mounted outside FCI Recycling Building (adjacent to present compactor site) - Weather-proof key operated start/stop - Complete hopper enclosure; 3 sides, top and door with hasp lock device and door limit switch - Hydraulic oil heater with thermostat - Container guide island - Compactor rating NSWMA 1.06 - 1.52 - Compactor cycle time: 30-33 seconds - Ram penetration: 6-10' - Packing pressure: normal 39,000 - 41,000 lbs, maximum 44,000 - 49,000 lbs - Electrical: motor 10 HP, 480 v, 3 phase, 60 cycle - control voltage 110 v, single phas

Division 41 -

Material Processing and Handling Equipment.