Burger Baylor Gutters Replacement

There are two scope of work for this project. 1. The Masonry contractor is responsible for removal and replacement of 4 column covers. 2. The Roofing contractor is responsible for all other work as referenced on the drawings (with the exception of the masonry work) and as covered in the project manual complete (this is considered a complete turn key project for each scope of work), including all demo, removal and legal disposal of items. Existing Gutters, Downspouts And Splash Block S To Be Removed - Basis Of Design For New Gutters To Be Atas International Inc. Ultra Hp Gutter - .050 Aluminum Custom Size 8"X10"X7", See Sheet A5.03 - Provide At Each Corner Splash Guard Of Break Metal From Flat Sheets, Color To Match New Gutters, Classic Bronze. - New Gutters Color To Match Existing. Finish To Be Classic Bronze. - Basis Of Design For New Soffit To Be Atas International Inc. Wall Panel Design Dsh, .040 Aluminum, See Sheet A5.03 - Finish Of Soffit To Be Woodland Series - Cedar - Basis Of Design For Downspouts To Be Atas International Inc., - .050 Aluminum, Size 4"X5", Color To Match New Gutters, Classic Bronze, See Sheet A5.03 - Downspouts Type D-1 Spill Out On Grade In Stone Base. Extend Downspout 2' Away From Building - Downspouts Type D-2 To Be Connected To The Storm Line Like Existing - Downspouts Type D-3 Spill Out On Grade In New Concrete Splash Block. Extend Downspout 2' Away From Building - Provide New Concrete Splash Block In Location Where Noted. - Provide Additional Or New Stone Bed As Noted. - New Stone To Match Existing Stone - Four (4) Existing Brick Column Enclosures To Be Re-Built, See Detail C/A5.03 - Brick Veneer To Match Existing Brick Veneer

Division 04 -	Masonry, Common Work Results for Masonry, Masonry Mortaring, Unit Masonry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Roof Specialties, Manufactured Gutters and Downspouts.